印花設備專用油加熱器
1、 循環泵：5.5HP油泵。
2、加熱功率：36KW（18+18KW）
3、   熱油出入口：DN40法蘭式截止閥1.5＂內螺紋
4、  冷卻水：3/4＂球閥

>>機型特點   Main feature
    ●   最高使用溫度300℃  Highest temperature reaching 300℃
    ●   按鍵式操作面板，操作簡單 The panel control adopted micro, easy operation
　●   采用連軸式熱媒油泵浦，泵浦流量大，使用壽命長 usehot oil pump of axis-connection type with big flow rate and long service life
　●   可指定選用德國KSB、德國SPECK、德國ALLWEILER熱媒油泵浦    KSB, SPECK, ALLWEILER hot oil pump from Germen is available
　●   采用TAT法蘭式球閥及法蘭式過濾 器  TAT flanged ball valves and flange type filter
    ●   “OMRON”、“SCHNEIDER”控制零件 Controlling parts of OMRON, FUJI brand
    ●   自動排氣和帶手動模具回油功能 Full automatic exhaust function and manual mode die oil return function
    ●   出油溫度顯示 temp. indication of oil output and return
    ●   多段加熱控制，功率可自行調整 multi-zone heating control with power self-adjusting function
    ●   電氣配電箱采用雙重隔離及散熱設計 Double-insulation/heating dissipation design for the electric distributioin cabinet
    ●   減少廢品率、減少加熱時間、增加模具/模板壽命  Increase the service life of mold/ templet and reduce the waste rate and the heating time
    ●   特殊管路系統設計，傳熱油不氧化，壽命長Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle. 
    ●   采用高溫保溫材料隔熱處理，節約能源及熱量損失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.
    ●   故障指示，維修不用專業人員Fault indication function which allows maintenance without professional maintainers.

>>安全保護系統
    ●   總電源過電流無熔絲斷路器 Circuit breaker    
　●   異常警告指示燈系統 Alarm system
    ●   馬達反轉保護及指示燈 motor rollback protective lamp   
　 ●   異常警告蜂鳴器 Alarm sounding
    ●   缺油保護及指示燈Oil lack protective lamp                   
　●   保溫隔熱處理 Insulation heating system
    ●   過熱保護及指示燈 over-heat protective   
　●   回油溫度顯示表Oil reture display
    ●   循環泵浦過載保護及指示燈Circuiting pump overload protective lamp
　●   電源欠相保護 Power protection
　●   By-Pass油壓回路 By-pass hydrauic circuit
   ●接觸器卡死報警提示，超高溫斷電功能,有效預防著火.

>>產品參數Specification